2" Square Shaft Helical Extension(SS200), 14 x 4ft
Catalog ID: C1100577
Square Shaft anchors are used in areas where weak soil conditions exist and/or higher holding capacities are required. Extension shafts are added to allow the Lead Section to be installed to the proper depth. The Chance Square Shaft "SS" Anchor Lead Sections are available in various helical plate combinations and square shaft sizes. The Square Shaft screw anchor system consists of three galvanized components: Lead Section (sold separately), Extension Shaft, and the Guy Adapter (sold separately).
- Finish: Galvanized
- Capacity of helical pile can be determined by measuring installation
|Coating||Galvanized, ASTM A-153|
|Number of Helices||1|
|Strength Note||Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.|
|Tensile Strength||150000 lb|
|Torque Rating||16000 ft-lbs|
|Anchor Helix Diameter(s)||14 in|
Resources and Downloads
Please wait, preparing to download your file.