Anchor, Extension, SS5, X 3.5ft

Brand:

Chance

Catalog ID:

12655

Square Shaft (SS 5) Extension 3' 6" long (1067 mm)

Square Shaft anchors are used in areas where weak soil conditions exist and/or higher holding capacities are required. Extension shafts are added to allow the Lead Section to be installed to the proper depth. The Chance Square Shaft "SS" Anchor Lead Sections are available in various helical plate combinations and square shaft sizes. The Square Shaft screw anchor system consists of three galvanized components: Lead Section (sold separately), Extension Shaft, and the Guy Adapter (sold separately).

  • Square Shaft Lead Sections are assembled to Square Shaft Extension with through bolt.
  • Hot dipped galvanized per ASTM A153
  • Capacity of anchor can be determined by measuring installation torque
  • Bolt and nut are assembled to extension at the factory

Product details

General

Application
Helical Anchoring
Coating
Galvanized, ASTM A-153
EU RoHS Indicator
No
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
70000 lb.
Torque Rating
5500 ft-lbs
Type
Anchor Extensions
UPC
096359068594

Dimensions

Dimensions
42.000 in x 3.500 in x 2.500 in
Height
2.5 in
Length
42 in
Weight
27.44 lb
Width
3.5 in

Certifications And Compliance

RUS Listed Reference
z - Anchors, Power-installed screw

Logistics

Pallet Quantity
50
Standard Package
1