text.skipToContent text.skipToNavigation

LAL6030D-L4-2AP

by Killark 

Catalog ID: LAL6030D-L4-2AP

LAL Series LED Linear, Hazardous Rated 60 Watt, 120-277 VAC , 5000K, 7064 Lumens, With 2 Access Plates

  • Supplemental 20KA/10KV Surge Protection is standard for 120-277 VAC models and 10KA/10KV Surge Protection is standard for 347-480 VAC models.
  • LALxE models have “built-in” battery backup for 90 minute emergency exit.
  • Shallow design minimizes profile in work areas with low ceiling heights
  • Diffuse Lens Standard to minimize glare.
  • Clear Lens available.
  • Polycarbonate Single Lens 18W to 60W, Double Lens model 34W to 120W.
  • Slot Back Design allows multiple mounting access points across length – slots can also be used with 5/16” or 8mm bolts & nuts.
  • 3 housing slots, 1 center back and 2 at 45°
  • Variety of mounting options including swivel brackets, wall, ceiling brackets, or beam clamps.
  • End Caps each have 2 mounting feet built-in plus a safety strap attachment point.
  • Standard unit End Caps each have a single ¾” NPT hub.
  • Fixture is furnished with one ¾” close-up plug and two ¾” to ½” reducers – provides out of the box ½” dead-end to ¾” feed-through flexibility.
  • Metric openings are available.
  • Standard LALs have one wiring Access Plate for easy access to driver leads.
  • Many Midpower LEDs blend light to simulate fluorescent tubes.
  • Crisp White Light for Excellent Color Rendering – Chromaticity 5000K (CCT) approx. 70 CRI.
  • Energy Savings – High lumens per watt.
  • LED Array Life – to 212,000 maintenance free hours to 70% initial lumens.
  • Ambient suitability -40°C to 65°C (see tables). 0°C to 50°C Ambient suitability for Emergency models.
  • Instant On – Including after power interruption.
  • World Voltage 120 - 277VAC 50/60Hz.
  • Solder-LESS LED Board Connections – Vibration Resistant.
  • LM80-08 Measurement of lumen maintenance for LED light sources
  • LM79-08 Certified “Absolute” Photometry, including Chromaticity Color for Solid State Lighting
  • L70 Values – Industry Nomenclature for Hours of use to 70% of initial Lumens – TM-21 & Calculated

LAL Series Linear LED fixtures are made of a copper-free aluminum body and use energy efficient LED's that are suitable for use in harsh and hazardous environments. The LAL Series hold Quad Certification for installation all over the world having NEC, CEC, IECeX, and ATEX certifications.

Product Details

General

Application Linear LED Luminaires are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, and NEMA 3, 4X, IP66 areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC/CEC/IEC.
Finish Type Natural
Light Source LED
Lumen Range 5,001-10,000 lm
Lumens 7064
Material Aluminum
Mounting Type Pendant or Surface
Operating Temperature Celcius Max 40
Operating Temperature Celcius Min -40 °C
Operating Temperature Range Celcius -40°C to 40°C
Optic Type Polycarbonate Lens - Diffused
Series LAL
UPC 783936124094

Dimensions

Hub Size 3/4"
Weight 18.9 lb

Electrical Ratings

Frequency Rating 50/60 Hz
Lumens Per Watt 21.7
Voltage Rating 120-277 VAC
Wattage 60 W

Certifications and Compliance

Hazardous Rating(s)
  • Class I, Division 2, Groups A, B, C, D
  • Class I, Zone 2, Groups IIC, IIB, IIA
  • Class II, Divisions 1 & 2, Groups E, F, G
  • Class III, Divisions 1 & 2
  • Zone 2
  • Zone 21
IP Rating IP66

Photometry

IES Files Color Temperature CRI Delivered Lumens Lm/W Watts Distribution Type
KIL_LAL6030D
IES file