SDCâ„¢ Series, Composite Bushing - 123kV
Brand: Electro Composites
Catalog ID: 550-006-T-633-10
SDCâ„¢ 123kV-600DL A Transformer Condenser Bushing, Solid-Dielectric-Capacitor Type, Rated per CSA C88.1, Drawlead Connected for Air-to-Oil Applications, 23.6" Min. Oil Immersion Level/CT Pocket Length, 148.5" Min. Creepage Length
Electro Composites SDC™ composite bushings are designed to provide the toughest, cleanest and safest bushing solution for all HV applications. We make standard OEM and aftermarket form-fit-function replacement bushings for substation transformers, GSU transformers, oil circuit breakers, switchgear, wall/floor (air-air and oil-oil), HVDC and other applications. Available from 1kV up to 170kV with current ratings up to 21,500A. SDC™ (Solid Dielectric Capacitor) bushings have a one-piece cycloaliphatic epoxycore and integral sheds. All SDC bushings are solid dielectric insulation – oil–free construction, capacitance graded condenser core with internal CT pocket/ground shield and a flange test tap, available in bottom connected or draw-lead configurations. Made in accordance with the most current bushing standards: IEEE C57.19.01, CSA C88.1, IEC 60137.
- SDCâ„¢ - Solid Dielectric Capacitance Graded Composite Construction
- EC-APG-02 Cycloaliphatic Epoxy Compound for Optimal Performance
- No oil, paper or porcelain
- Can be mounted vertically or horizontally
- Meets CSA C88.1 Electrical and Mechanical Requirements
For Bushing Test Terminals, please see HereFor Bushing Drawlead Connectors and Adapters, please see Here
General
Application
Transformer
Bottom Terminal Type
CORONA SHIELD with 4x 3/8-16 holes on 3.75 BC
Catalog Number
550-006-T-633-10
Color
Gray
Immersion Type - Above Flange
Air
Immersion Type - Below Flange
Oil
Material - Flange
Aluminum
Material - Insulation
APG-02 - Cycloaliphatic Epoxy
Mounting Position
Vertical to Horizontal
Number of Bolt Holes - Bottom Terminal
4
Number of Flange Mounting Holes
8
Series
SDCâ„¢ Series
Test Tap
Yes
Top Terminal Plating
Silver
Top Terminal Type
1 1/2-12
Type
SDC - Solid Dielectric Capacitor
Dimensions
Above Flange Length
59.93 in
Below Flange Length
44 in
Depth
16.44 in
Diameter - Above Flange Maximum
11.38 in
Diameter - Below Flange Maximum D <gt/> 1"
7.03 in
Diameter - Below Flange Maximum P
7.11 in
Diameter - Conductor Outside Under Insulation
2.5 in
Diameter - Live Part Bottom
5 in
Diameter - Live Part Top
5 in
Diameter - Rod / Tube
2.50/1.63 in
Dimensions
103.93 in x 16.44 in x 16.44 in
Effective Length - Top Terminal
2.5 in
Flange Mounting Hole Bolt Circle
15 in
Flange Mounting Hole Diameter
0.88 in
Flange Outside Diameter
16.44 in
Height
16.44 in
Length
103.93 in
Length - Drawlead Above Flange
55.12 in
Length - Ground Shield
23.6 in
Length - Insulated Section
96 in
Length - Insulation Above Flange
47.7 in
Length - Insulation Below Flange
19.2 in
Length - Live Part Bottom
1.2 in
Length - Live Part Top
6.8 in
Length - Minimum Oil Immersion Level
23.6 in
Sealing Surface Inside Diameter
7.14 in
Sealing Surface Outside Diameter
14.12 in
Stud Inside Diameter
1.62 in
Thickness
2.265 in
Thread Size - Drawlead Connector
1 1/4-12
Top Terminal Min. Thread Length
2.5 in
Weight
305 lb
Width
16.44 in
Electrical Ratings
BIL
550 kV
Current Rating
600 A
kV Class
123 kV
Minimum Creepage
148.5 in
Minimum Strike
50.7 in
Withstand Voltage - 60 Hz Dry
280 kV
Certifications And Compliance
Industry Standard(s)
CSA C88.1
Operational
Immersion Type - Above Flange
Air
Immersion Type - Below Flange
Oil
Configuration
Bottom Terminal Type
CORONA SHIELD with 4x 3/8-16 holes on 3.75 BC
Mounting Position
Vertical to Horizontal
Number of Bolt Holes - Bottom Terminal
4
Number of Flange Mounting Holes
8