123 Industrial Cable Gland
Brand:
Hawke
The 123 dual seal industrial cable gland incorporates two independent seals and is intended for use on non-armoured elastomer and plastic insulated cables in indoor or outdoor applications. This cable gland may be used with braided cables where the braid and outer sheath pass into the enclosure. The braid must then be suitably terminated inside the enclosure . The two seals provide superior cable retention over standard unarmoured cable glands.
- Metallic body construction
- Two Elastomeric compression seals onto cable outer sheath
- Rounded Cable entry to prevent cable damage
- Available with metric or NPT entry threadforms
Visit <a href="http://www.universalreloaded.com" target="_blank">www.universalreloaded.com</a> to download a full version of the catalogue. <br><a href="http://www.hubbell.com/hawke/en/resource-search" target="_blank">Click here for Resource Search tool.</a>
Product details
General
Application
Industrial Applications
Ingress Protection
- IP66 and IP67 to IEC/EN 60529
- Deluge Protection to DTS01
Material
Manufactured in Brass, Nickel Plated Brass or 316L Stainless Steel
Operating Temperature
-60°C to +100 °C
Series
Industrial Cable Glands
Certifications And Compliance
Certification
- Ingress Protection: IP66 and IP67 to IEC/EN 60529
- Enclosure Protection: IK10 to IEC 62262
- Deluge Protection: to DTS01
- Construction & Test Standards: IEC/EN 62444 (Anchorage Type B)
Industry Standard(s)
IEC/EN 62444 (Anchorage Type B)
Non Hazardous Location
BS EN 62444:2013, BS 6121: Part 1 Type A2
Ratings
IK10 to IEC 62262