Anchor, PISA Rod, 3/4in X 7ft, 1in threads
Brand: CHANCE Utility
Catalog ID: 12632P
Pisa anchor rod 0.75" (19.1 mm) diameter, 7' (2134 mm) long. Eyenut not included.
Chance PISA rods are designed to be used with Tough One and PISA screw anchors. Both ends have a forged hex to allow the rod to be tightened to the anchor and the eyenut. The 5/8" diameter rods have 5/8" diameter threads; 3/4" and 1" diameter rods have 1" threads. Anchors and eyenuts have either 5/8" threads or 1" threads. Rods are galvanized in accordance with ASTM A153. Anchor rods are available without the eyenut or with various styles of eyenuts assembled to the rod at the factory.
- Hot forged hex collar provides strong connection to anchor and eye
- Hot dipped galvanized per ASTM A153
- Rods used with PISA® Power Installed Screw Anchors
- Cannot be used with Expanding and Plate Anchors
General
Application
Helical Anchoring
Catalog Number
12632P
Coating
Galvanized, ASTM A-153
Material Type
Standard
Product Type
Anchor Rod
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
23000 lb.
Type
Power Installed Screw Anchor (PISA)
UPC
096359068440
Dimensions
Dimensions
84.000 in x 1.400 in x 1.400 in
Height
1.4 in
Length
84 in
Rod Diameter
0.75 in
Weight
9.506 lb
Width
1.4 in
Certifications And Compliance
RUS Listed Reference
z – Anchors, screw, power installed
Force Related
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
23000 lb.
Logistics
Pallet Quantity
50
Standard Package
5