text.skipToContent text.skipToNavigation

501/423

by Hawke 

The 501/423 dual certified Exe/Exd cable gland incorporates two independent seals and is intended for use on non-armoured elastomer and plastic insulated cables. This cable gland may be used with braided cables where the braid and outer sheath pass into the enclosure. For Exd application the cable must be suitable inline with 60079-14. The braid must then be suitably terminated inside the enclosure. The two seals provide superior cable retention over standard unarmoured cable glands.See technical section for installation rules and regulations

  • Two Independent Elastomeric Exd flameproof seals on cable inner sheath – The double seals provide superior cable retention over standard unarmoured Cable Glands
  • Rounded Cable entry to prevent cable damage

See technical section of the datasheet for installation rules and regulations. Visit www.universalreloaded.com to download a full version of the catalogue

Product Details

General

Application Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22
Ingress Protection IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X
Material Brass, NP Brass or Stainless Steel
Operating Temperature -60°C to +100 °C
Series Group II Cable Glands

Certifications and Compliance

ATEX File Number CML 19ATEX1167XCML 19.0045X
CSA File Number CSA1015065
Certification
  • IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31
  • UL 60079-0, UL 60079-1, UL 60079-7, , UL 2225
  • CSA 22.2 No: 60079-0, CSA 22.2 No: 60079-1, CSA 22.2 No: 60079-7, CSA 22.2 No: 60079-31
  • ISA 60079-31
Hazardous Rating(s)
  • Flameproof Exdb IIC Gb, Increased Safety Exeb IIC Gb and Dust Extb IIIC Db Ex 2 GD
  • Flameproof AExd IIC Gb, Increased Safety AExe IIC Gb and Dust AExtD Zone 21
  • DTS01