text.skipToContent text.skipToNavigation

Anchor, Cross-Plate, 24in painted fits 1.25in rod

By CHANCE Utility 

Catalog ID: X241

By CHANCE Utility
Catalog ID:  X241
Cross-Plate Anchor for 24" (610 mm) Hole used with 1.25" (31.7 mm) Diameter Rod.

The Chance Cross-Plate anchor is made for installation in holes drilled by power diggers or dug with backhoe. . Because the size of the hole does not affect holding capacity, the hole can be dug by the same auger that is used to dig the pole holes ontransmission projects. Cross-Plate anchors are installed in a diagonal bored hole which is undercut so the anchor is at right angles to the guy. A rod trench is either cut with a trenching tool or drilled with a small power auger. Both anchor and rod trenchshould be refilled and tamped.

  • Cross-plate anchors are designed to be installed against side of hole. Rod trench is required to align rod with guy load.
  • Painted with black paint
  • Nut retainer on bottom of anchor holds nut in place during installation
  • 2nd alternate image: Top view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor
  • 1st alternate image: Bottom view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor
Add to List

More Options

Product Details


Application Earth Tension Anchoring
Coating Black Paint
Die Index 241
Die Type X
Item Type 4D
Trade Name N
Type Earth Tension Anchors
UPC 096359066583
UPC 12 Digit 7818105287233


Anchor Hole Size 24 in
Area 400 in²
Rod Diameter - Order Separately 1.250 in
Weight 34.114 lb

Certifications and Compliance

Certification - CSA Approved N
Certification - ETL N
Certification - UL Recognized N
Certification - cULus N
Standards - RoHS Compliance Status EX
UL Listed No


Pallet Quantity 24
Standard Package 1

Resources and Downloads