Anchor, Extension, SS150, 14/14 X 7ft
Brand:
Chance
Catalog ID:
C1100454
Square Shaft (SS 150) Extension 7' (2134 mm) w/ two 14" (355 mm) Helices.
Square Shaft anchors are used in areas where weak soil conditions exist and/or higher holding capacities are required. Extension shafts are added to allow the Lead Section to be installed to the proper depth. The Chance Square Shaft "SS" Anchor Lead Sections are available in various helical plate combinations and square shaft sizes. The Square Shaft screw anchor system consists of three galvanized components: Lead Section (sold separately), Extension Shaft, and the Guy Adapter (sold separately).
- Square Shaft Lead Sections are assembled to Square Shaft Extension with through bolt.
- The helical shaped plates do not auger into the soil but rather screw into it with minimal soil disturbance
- Hot dipped galvanized per ASTM A153
- Capacity of anchor can be determined by measuring installation torque
- Bolt and nut are assembled to extension at the factory
Product details
General
Application
Helical Anchoring
Coating
Galvanized, ASTM A-153
EU RoHS Indicator
No
Number of Helices
2
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
70000 lb.
Torque Rating
7000 ft-lbs
Type
Anchor Extensions
UPC
096359009788
Dimensions
Anchor Helix Diameter(s)
14 in - 14 in
Length
84 in
Weight
91.463 lb
Logistics
Pallet Quantity
12
Standard Package
1
Resources and downloads
Specifications
Catalogs
Installation Manuals
Sales Drawings
Videos
CHANCE Square Shaft Anchor Tools Selection Process
CHANCE Square Shaft Anchor Installation