Fire Pump Controller MPT700 Pilot Series - Soft Start
By Metron/Metron-Eledyne
Catalog ID: HCMPT700
By Metron/Metron-Eledyne
Catalog ID:
HCMPT700
MPT700 Pilot Series Soft Start Fire Pump Controllers utilize a solid state motor controller. The motor voltage is raised to an adjustable initial torque value. The motor voltage is gradually increased during the acceleration ramp time, max. of 10 seconds per NFPA 20. After a minimum run time and all starting causes have returned to normal, the controller will initiate a ramp down process by smoothly decelerating the motor at an adjustable rate to a stop. This smooth acceleration/deceleration of the motor reduces surges and water hammer in the sprinkler system. In-rush current can be adjusted as low as 25%.
Product Details
General
| Application | Fire Protection System |
| Series | MPT Pilot |
| Temperature Range | 4.4⁰C to 50⁰C |
| Type | Solid State Soft Start |
Electrical Ratings
| Frequency Rating | 50/60 Hz |
| Power Factor | 15-600 |
| Voltage Rating | 200-600 V |
Certifications and Compliance
| Industry Standard(s) | UL Listed |
Please wait, preparing to download your file.