Switches and Lighting Controls, Occupancy Sensors, Adaptive Technology Passive Infrared Ceiling Sensor, 1500 Square Feet Coverage, With Relay

By Hubbell Wiring Device-Kellems

Catalog ID: ATP1500CRP

Switches and Lighting Controls, Occupancy Sensors, Adaptive Technology Passive Infrared Ceiling Sensor, 1500 Square Feet Coverage, With Relay

By Hubbell Wiring Device-Kellems

Catalog ID: ATP1500CRP

Switches and Lighting Controls, Occupancy Sensors, Adaptive Technology Passive Infrared Ceiling Sensor, 1500 Square Feet Coverage, With Relay

Standard Passive Infrared Technology requires a clear, unobstructed line of sight for detection, because it senses occupancy as movement of heat emitted from the body against the background space. A segmented Fresnel lens divides a coverage area into zones. Movement across zones is interpreted as occupancy. Excellent for small room control.

Coverage 1500 sq. ft. (360°) with photocell and isolated relay, low voltage sensor
Long range major motion detection
Office White ABS enclosure blends with ceiling tile
Relay to interface with auxiliary systems such as HVAC
Red LED indicates passive infrared detection
"Install and Forget" operation. Auto-adjusting adaptive technology eliminates manual adjustments

With Photocell and Relay

Add to List

More Options

Where to Buy

See locations

General

Application	Compatible with most LED and CFL
Color	Office White Blanc
Environmental Conditions	Indoor Dry Unless Protected By Additional Means
Humidity	0% to 95% non-condensing relative humidity
Indicator(s) Type	PIR= Red LED
Item Type	Low voltage Ceiling Sensors
Load Capacity	Load Is A Function Of The Control Unit
Material	ABS (Acrylonitrile butance styrene - Thermoplastic polymer)
Material - Mounting Hardware	Screw Mounting
Mounting Type	Ceiling Mount
OEM Brand Name	Hubbell Wiring Device-Kellems
Operating Cycles	6,000 Cycles Minimum
Operating Temperature	32°F to 104°F (0°C to 40°C) with rate of change not exceeding 20°F(11°C) per hour
Performance	Controls - Ambient Light - 1 to 1000 foot candles Controls - Sensitivity - Adaptive 0 to 100% Controls - Time Delay - Test (8 seconds), adaptive 8 to 40 minutes Electrical - Isolated Relay - Normally open and normally closed terminals available Electrical - Power Requirements - 24V DC nominal, 33mA from Hubbell CU series control unit Environmental - Operating Temperature - 32°F to 104°F (0°C to 40°C) with rate of change not exceeding 20°F (11°C) per hour Environmental - Storage Temperature - -20°F to 150°F (-29°C to 65°C), 0% to 95% non-condensing relative humidity Sensing Indicators - Passive Infrared - Red LED
Photocell	Yes
Series	Passive Infrared
Storage Temperature Range	-20°F to 150°F (-29°C to 65°C)
Style	Ceiling Mount
Type	Sensors Sensors
UPC	783585392523