Rod, Expanding/Cross-Plate Anchor, 3/4in X 6ft Thimbleye
Marque: CHANCE Utility
No de catalogue: 5326
Expanding/Cross-Plate Anchor Rod 0.75" (19.1 mm) Diameter Rod, 6' (1829 mm) long with Thimbleye.
Anchor rod used with Expanding and Cross-plate anchors are available for one, two, or three guys. Thimbleye, Twineye and Tripleye eye design distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading, kinking, or bending. The drop-forged eye of each anchor rod is stronger than the rod itself. Rod length and diameter are stamped below each rod eye. Each rod is threaded 3-1/2" minimum length. Heavy square nut included.
- Thimbleye®, Twineye® and Tripleye® drop forged eye distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading,kinking, or bending.
- Hot dipped galvanized per ASTM A153
- Square nut assembled to rod
- Rods used with Cross-plate and Expanding anchors
Général
Application
Earth Tension Anchoring
Catalog Number
5326
Enduit
Galvanized, ASTM A-153
Indicateur EU RoHs
No
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
23000 lb.
Type
Anchor Rod
Type d'écrou à 'illet
Thimbleye
Type de matériel
Non-Standard
UPC
096359072386
Dimensions
Diamètre de la tige
0.75 in
Dimensions
72.000 po x 1.625 po x 1.500 po
Hauteur
1.5 in
Largeur
1.625 in
Longueur
72 in
Poids
9.604 lb
Certifications et conformité
Indicateur EU RoHs
No
Norme(s) de l'industrie
NEMA Standard
Liée à la force
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
23000 lb.
Logistique
Emballage standard
5
Nombre d'unités sur la palette
100