Dispositifs à broche et manchon CEI, mâle, fiche, 100A triphasé delta 480V, 3-pôles 4-fils, mise à la terre, vis terminales, rouge, étanche à l'eau, HBL4100P7W
Marque: Hubbell Wiring Device-Kellems
No de catalogue: HBL4100P7W
Dispositifs à broche et manchon CEI à usage intensif, qualité industrielle, mâle, fiche, 100A triphasé delta 480V CA, mise à la terre 3-pôles 4-fils, vis terminales, rouge, étanche.
Watertight Devices - Hubbell’s IEC 60309 Pin and Sleeve plugs, connectors, inlets and receptacles are the highest performing products available. The HBL® series of IEC pin and sleeve were designed for the demanding North American market. Hubbell was the first and is still only manufacturer of IEC 60309 devices in the USA and have numerous innovative features noted below. The IEC line of plugs and connectors are made with a rugged super tough, one-piece housing. The thermoset polyester contact carrier provides a high resistance to electrical tracking. They withstand higher temperatures which may result from overload or arcing. The heavy-duty, external cord grip provides superior strain relief on the conductors. Hubbell’s horsepower rated plugs and receptacles meet NEC 430.109(F) requirements and recognized as an approved disconnecting “line of sight” disconnecting means.
- Broches solides d'un seul tenant pour un contact électrique fiable
- L'anneau d'étanchéité avec joint assure l'étanchéité à l'eau
- Les prises externes de cordon à usage intensif
Étanchéité
Détails du produit
Général
Application
- Connexions à haute intensité
Catalog Number
HBL4100P7W
Conditions environnementales
Watertight
Couleur
Red
Indicateur EU RoHs
Yes
Matériau
Composite
Matériel - quincaillerie de montage
Cord Mounted
Nom de marque de fabricant d'origine
Hubbell Wiring Device-Kellems
Nombre de pôles
3-Pole
Performance
- Electrical - Current Interrupting - Certified for current interrupting at full rated current
- Electrical - Dielectric Voltage - Withstands 3,000V AC Min
- Electrical - Max. Working Voltage - 600V AC RMS
- Environmental - Flammability - HB or Better per UL 94 or CSA C22.2 No. 0.17
- Environmental - Ingress Protection - IP67 Suitability
- Environmental - Moisture Resistance - Watertight per IEC 60309-1
- Environmental - Operating Temperature - Maximum Continuous 75°C
- Minimum - 40°C w/o impact
- Mechanical - Impact Resistance - Per CSA C22.2 No. 182.1 / UL1682
- Mechanical - Product Identification - Identification and ratings are a permanent part of the device housing.
- Mechanical - Terminal Identification - Terminals identified in accordance with North American and IEC conventions
Série
HBL Heavy Duty
Spécifications
- Contact Carrier - High-Impact Thermoset
- Housing - Zytel® ST801 Nylon
- Locking Ring - Reinforced Thermoplastic Polyester
- Retainer - High-Impact Thermoset
- Terminal Screws - Stainless Steel
Type
Standard Service
Type
Watertight Plug
Type d'article
Male Plug
UPC
783585404042
Dimensions
Taille de l'afficheur
Standard Sized
Caractéristiques électriques
Connectivité
Pressure Terminal Screws
Courant nominal
100 A
Courant nominal
100 A
Courant nominal
100 A
Description de la tension nominale
3 Phase 480 VAC
Phase
Three Phase
Tension nominale
3 Phase 480 VAC
Lié au conducteur
Calibre des fils
#3 AWG to #1/0 AWG
Nombre de fils
4-Wire
Type de cordon
All Portable
Certifications et conformité
Achetez des produits qualifiés aux États-Unis
TAA Compliant (All status valid till December 2024)
Classe NEMA nominale
Non-NEMA
Norme(s) de l'industrie
- CSA Standard C22.2 No. 182.1
- UL Classified to IEC60309-1
- UL Listed, File E146032
Logistique
Nombre d'unités sur la palette
126
Quantité dans l'emballage
6