00:00Ok. I'm recording.

00:01It's uh number one with no tension and I think the highest we can get is 8700 here it

00:08goes for a second, right?

00:14Hey, hey, that second.

00:21Yeah. Oh, is it for one

00:27second? Have to go. Definitely.

00:34Ah but it survived.

00:41OK. Same connector.

00:42It's still hot.

00:44Uh We're gonna go now for two seconds at 8500.

00:48Here we go.

00:57Beautiful.

01:00Looks like the 2.2 seconds and looks like we fried the A CS R but

01:07the connector he is still alive.

01:11Here we go. Uh This is the pretension sample.

01:15We're gonna do one second and approximately 8500 amps.

01:20See how we do. OK.

01:32I think that was more than one second.

01:35So we just tested this one about a second and a half and the cable started to melt.

01:40Now we're just gonna hit it and see test until cable fails and then evaluate the connector.

01:46Ok. Go ahead.

02:01OK. We're gonna pause that.

02:02We'll be right back. Ok?

02:05The machines reset and now we're ready.

02:14Yes. Ok.

02:182.8 seconds.

02:20And it looks like the cable is still failed to look at the connector

02:32connector looks good. Still, here's the last set up with constant

02:38tension. We're just going to bump it to see how many

02:41amps we're pushing through that outside.

02:49What was that? 6300 right there?

02:52I'll do uh 6300 amps for a second and a half.

02:59Yeah. So I that

03:07five. Yeah, man.

03:10Well, that was that cable failed again.

03:15Look at the connectors here. Yes.

03:20And look your touches there.