text.skipToContent text.skipToNavigation

123

Par Hawke 
Par Hawke
The 123 dual seal industrial cable gland incorporates two independent seals and is intended for use on non-armoured elastomer and plastic insulated cables in indoor or outdoor applications. This cable gland may be used with braided cables where the braid and outer sheath pass into the enclosure. The braid must then be suitably terminated inside the enclosure . The two seals provide superior cable retention over standard unarmoured cable glands.See technical section for installation rules and regulations to be written and applied in this master excel file
  • Metallic body construction
  • Two Elastomeric compression seals onto cable outer sheath
  • Rounded Cable entry to prevent cable damage
  • Available with metric or NPT entry threadforms

Visit www.universalreloaded.com to download a full version of the catalogue.
Click here for Resource Search tool.

Plus d'options

Où acheter
Obtenir un devis

Détails du produit

Générale

Application Industrial Applications
Matériau Manufactured in Brass, Nickel Plated Brass or 316L Stainless Steel
Protection d’infiltrations
  • IP66 and IP67 to IEC/EN 60529
  • Deluge Protection to DTS01
Série Industrial Cable Glands
Température fonctionnement -60°C to +100 °C

Certifications et conformité

Certification
  • Ingress Protection: IP66 and IP67 to IEC/EN 60529
  • Enclosure Protection: IK10 to IEC 62262
  • Deluge Protection: to DTS01
  • Construction & Test Standards: IEC/EN 62444 (Anchorage Type B)
Emplacement non dangereux BS EN 62444:2013, BS 6121: Part 1 Type A2
Fiche technique IK10 to IEC 62262
Norme(s) de l’industrie IEC/EN 62444 (Anchorage Type B)

Ressources/téléchargements