text.skipToContent text.skipToNavigation

Product Listing

By Electric Controller Manufacturing Company  
The SSI accelerating modules are recommended for use in DC motor circuits and are used to control the closure of the accelerating contactors. They are frequently used on DC crane control and mill auxiliary control panels
By Electric Controller Manufacturing Company  
Static Timers are used to control closure of accelerating contactors on DC crane and mill auxiliary control panels
By Electric Controller Manufacturing Company  
These DC operating coils are designed in accordance with NEMA standards to withstand 110 percent of rated voltage continuously and to operate the contactor successfully at 80 percent of rated voltage
By Electric Controller Manufacturing Company  
Replacement parts kits are available for magnet controllers and AC and DC Type M and MX contactors. Copper contact tips are used in standard applications. Silver-faced contact tips are recommended for applications where the contactors remain closed for long periods of time. Silver-faced contact tips are supplied as standard on crane main disconnect switches and are optional on DC starters and other devices. Each tip kit contains movable and stationary contacts, necessary hardware and servicing instructions
By Electric Controller Manufacturing Company  
The Al1 arc suppressor is designed to reduce arcing of pilot devices in DC inductive control circuits of 250VDC or less
By Electric Controller Manufacturing Company  
The Type M contactors are furnished without power lugs. The Power Lug Kit is available consisting of lugs and hardware for mounting on NEMA Size 3 and larger contactors. No power lug kits are available for the NEMA Size 1 and 2 contactors. These contactors are designed to use lugs supplied by the user
By Electric Controller Manufacturing Company  
The Electrical Interlocks modification kit can be added to the Class 7004 and Class 8503 Type M contactors used in DC starters and AC and DC crane and mill control panels
By Electric Controller Manufacturing Company  
The Contact modification kit can be added to the Class 7001 Type K Relays
By Electric Controller Manufacturing Company  
The Mechanical interlock modification kit can be added to the Class 7004 and Class 8503 Type M contactors
By Electric Controller Manufacturing Company  
The Tie bar are used for applications requiring double pole normally open Type M contactors can be met by supplying single normally open contactors with tie bars. For double pole contactors, it is recommended that the operating coils be connected in series. Each coil should be rated for one half of the line voltage
By Hubbell Industrial Controls  
Catalog ID: HC371212
Accelerator, 12V with Connector
By Hubbell Industrial Controls  
Catalog ID: HC371222
Accelerator, 24V-48V with Connector
By Hubbell Industrial Controls  
Catalog ID: HC48422001
ARC SUPPRESSOR FOR DC CRANE
By Hubbell Industrial Controls  
Catalog ID: HC48422003
ARC SUPPRESSOR
By Hubbell Industrial Controls  
Catalog ID: HC48424002
Static In-Line Timer 5350 with Timing Range of 2.5 - 16 Seconds, for use in AC or DC Contacor and Relay Control
By Hubbell Industrial Controls  
Catalog ID: HC48424003
Static In-Line Timer 5350 with Timing Range of .08 - .75 Seconds, for use in AC or DC Contacor and Relay Control
By Hubbell Industrial Controls  
Catalog ID: HC48424004
Static In-Line Timer 5350 with Timing Range of .25 - 5 Seconds, for use in AC or DC Contacor and Relay Control
By Hubbell Industrial Controls  
Catalog ID: HC48848101
Static Off Delay Timer 5350, for use in AC or DC Contacor and Relay Control
By Hubbell Industrial Controls  
Catalog ID: HC48848102
Static Off Delay Timer 5350 2 - 20 Seconds, for use in AC or DC Contacor and Relay Control
By Hubbell Industrial Controls  
Audio Megaphone Hailer
By Hubbell Industrial Controls  
Audio Megaphone Aircraft Hailer