SDC™ Series, Composite Bushing - 13.2kV
Brand: Electro Composites
Catalog ID: 110-004-T-464-02
SDC™ 13.2kV-400DL A Transformer Condenser Bushing, Solid-Dielectric-Capacitor Type, Rated per IEC 60137, Drawlead Connected for Air-to-Oil Applications, 10" Min. Oil Immersion Level/CT Pocket Length, 44.8" Min. Creepage Length
Electro Composites SDC™ composite bushings are designed to provide the toughest, cleanest and safest bushing solution for all HV applications. We make standard OEM and aftermarket form-fit-function replacement bushings for substation transformers, GSU transformers, oil circuit breakers, switchgear, wall/floor (air-air and oil-oil), HVDC and other applications. Available from 1kV up to 170kV with current ratings up to 21,500A. SDC™ (Solid Dielectric Capacitor) bushings have a one-piece cycloaliphatic epoxycore and integral sheds. All SDC bushings are solid dielectric insulation – oil–free construction, capacitance graded condenser core with internal CT pocket/ground shield and a flange test tap, available in bottom connected or draw-lead configurations. Made in accordance with the most current bushing standards: IEEE C57.19.01, CSA C88.1, IEC 60137.
- SDC™ - Solid Dielectric Capacitance Graded Composite Construction
- EC-APG-02 Cycloaliphatic Epoxy Compound for Optimal Performance
- No oil, paper or porcelain
- Can be mounted vertically or horizontally
- Meets IEC 60137 Electrical and Mechanical Requirements
See Related Products HereSee Addtional Related Products Here
General
Application
Transformer
Catalog Number
110-004-T-464-02
Color
Gray
Flange Type
Dual BC
Immersion Type - Above Flange
Air
Immersion Type - Below Flange
Oil
Material - Flange
Aluminum
Material - Insulation
APG-02 - Cycloaliphatic Epoxy
Mounting Position
Vertical to Horizontal
Number of Flange Mounting Holes
4X / 3X
Series
SDC™ Series
Test Tap
Yes
Top Terminal Plating
Tin
Top Terminal Type
1 1/2-12
Type
SDC - Solid Dielectric Capacitor
Dimensions
Above Flange Length
29.4 in
Below Flange Length
13 in
Depth
8.64 in
Diameter - Above Flange Maximum
8.64 in
Diameter - Below Flange Maximum D <gt/> 1"
3.13 in
Diameter - Below Flange Maximum P
3.13 in
Diameter - Conductor Outside Under Insulation
1.25 in
Diameter - Live Part Bottom
1.25 in
Diameter - Live Part Top
3.5 in
Diameter - Rod / Tube
1.25/1.00 in
Dimensions
42.4 in x 8.64 in x 8.64 in
Effective Length - Top Terminal
4.25 in
Flange Mounting Hole Bolt Circle
7.25 in
Flange Mounting Hole Diameter
0.56 in
Flange Outside Diameter
8.5 in
Height
8.64 in
Length
42.4 in
Length - Drawlead Above Flange
24 in
Length - Ground Shield
10 in
Length - Insulated Section
35.9 in
Length - Insulation Above Flange
18.1 in
Length - Insulation Below Flange
2.8 in
Length - Live Part Bottom
0.2 in
Length - Live Part Top
6.3 in
Length - Minimum Oil Immersion Level
10 in
Sealing Surface Inside Diameter
4.37 in
Sealing Surface Outside Diameter
6.69 in
Stud Inside Diameter
1 in
Thickness
0.94 in
Thread Size - Drawlead Connector
3/4-10
Top Terminal Min. Thread Length
4.25 in
Weight
47 lb
Width
8.64 in
Electrical Ratings
BIL
110 kV
Current Rating
400 A
kV Class
13.2 kV
Minimum Creepage
44.8 in
Minimum Strike
20.5 in
Withstand Voltage - 60 Hz Dry
42 kV
Certifications And Compliance
Industry Standard(s)
IEC 60137
Operational
Immersion Type - Above Flange
Air
Immersion Type - Below Flange
Oil
Configuration
Mounting Position
Vertical to Horizontal
Number of Flange Mounting Holes
4X / 3X