SDCâ„¢ Series, Composite Bushing - 15kV
Brand: Electro Composites
Catalog ID: 110-006-T-448-02
SDCâ„¢ 15kV-600DL A Transformer Condenser Bushing, Solid-Dielectric-Capacitor Type, Rated per CSA C88.1, Drawlead Connected for Air-to-Oil Applications, 21.6" Min. Oil Immersion Level/CT Pocket Length, 19.4" Min. Creepage Length
Electro Composites SDC™ composite bushings are designed to provide the toughest, cleanest and safest bushing solution for all HV applications. We make standard OEM and aftermarket form-fit-function replacement bushings for substation transformers, GSU transformers, oil circuit breakers, switchgear, wall/floor (air-air and oil-oil), HVDC and other applications. Available from 1kV up to 170kV with current ratings up to 21,500A. SDC™ (Solid Dielectric Capacitor) bushings have a one-piece cycloaliphatic epoxycore and integral sheds. All SDC bushings are solid dielectric insulation – oil–free construction, capacitance graded condenser core with internal CT pocket/ground shield and a flange test tap, available in bottom connected or draw-lead configurations. Made in accordance with the most current bushing standards: IEEE C57.19.01, CSA C88.1, IEC 60137.
- SDCâ„¢ - Solid Dielectric Capacitance Graded Composite Construction
- EC-APG-15NA High Temperature Cycloaliphatic Epoxy Compound for high temperature applications
- No oil, paper or porcelain
- Can be mounted vertically or horizontally
- Meets CSA C88.1 Electrical and Mechanical Requirements
For Bushing Test Terminals, please see HereFor Bushing Drawlead Connectors and Adapters, please see Here
General
Application
Transformer
Catalog Number
110-006-T-448-02
Color
Gray
Immersion Type - Above Flange
Air
Immersion Type - Below Flange
Oil
Material - Flange
Aluminum
Material - Insulation
APG-15NA - High Temp Cycloaliphatic Epoxy
Mounting Position
Vertical to Horizontal
Number of Flange Mounting Holes
4
Series
SDCâ„¢ Series
Test Tap
Yes
Top Terminal Plating
Silver
Top Terminal Type
1 1/2-12
Type
SDC - Solid Dielectric Capacitor
Dimensions
Above Flange Length
17.06 in
Below Flange Length
26.25 in
Depth
8.5 in
Diameter - Above Flange Maximum
8.64 in
Diameter - Below Flange Maximum D <gt/> 1"
3.12 in
Diameter - Below Flange Maximum P
3.24 in
Diameter - Conductor Outside Under Insulation
1.25 in
Diameter - Live Part Bottom
1.25 in
Diameter - Live Part Top
3.50 in
Diameter - Rod / Tube
1.25/1.00 in
Dimensions
43.31 in x 8.5 in x 8.5 in
Effective Length - Top Terminal
2.50 in
Flange Mounting Hole Bolt Circle
7.25 in
Flange Mounting Hole Diameter
0.88 in
Flange Outside Diameter
8.5 in
Height
8.5 in
Length
43.31 in
Length - Drawlead Above Flange
13.50 in
Length - Ground Shield
21.60 in
Length - Insulated Section
37.7 in
Length - Insulation Above Flange
6.60 in
Length - Insulation Below Flange
4.35 in
Length - Live Part Bottom
0.30 in
Length - Live Part Top
5.40 in
Length - Minimum Oil Immersion Level
21.60 in
Sealing Surface Inside Diameter
4.37 in
Sealing Surface Outside Diameter
6.37 in
Stud Inside Diameter
1 in
Thickness
0.935 in
Thread Size - Drawlead Connector
3/4-10
Top Terminal Min. Thread Length
2.5 in
Weight
37 lb
Width
8.5 in
Electrical Ratings
BIL
110 kV
Current Rating
600 A
kV Class
15 kV
Minimum Creepage
19.4 in
Minimum Strike
9 in
Withstand Voltage - 60 Hz Dry
50 kV
Certifications And Compliance
Industry Standard(s)
CSA C88.1
Operational
Immersion Type - Above Flange
Air
Immersion Type - Below Flange
Oil
Configuration
Mounting Position
Vertical to Horizontal
Number of Flange Mounting Holes
4