SDCâ„¢ Series, Composite Bushing - 69 KV
Brand: Electro Composites
Catalog ID: 350-004-T-1044-00
SDCâ„¢ 69kV-400DL A Transformer Condenser Bushing, Solid-Dielectric-Capacitor Type, Rated per IEEE C57.19.01, Drawlead Connected for Air-to-Oil Applications, 26.8" Min.Oil Immersion Level/CT Pocket, 82.5" Min. Creepage Length
Electro Composites SDC™ composite bushings are designed to provide the toughest, cleanest and safest bushing solution for all HV applications. We make standard OEM and aftermarket form-fit-function replacement bushings for substation transformers, GSU transformers, oil circuit breakers, switchgear, wall/floor (air-air and oil-oil), HVDC and other applications. Available from 1kV up to 170kV with current ratings up to 21,500A. SDC™ (Solid Dielectric Capacitor) bushings have a one-piece cycloaliphatic epoxycore and integral sheds. All SDC bushings are solid dielectric insulation – oil–free construction, capacitance graded condenser core with internal CT pocket/ground shield and a flange test tap, available in bottom connected or draw-lead configurations. Made in accordance with the most current bushing standards: IEEE C57.19.01, CSA C88.1, IEC 60137.
- SDCâ„¢ - Solid Dielectric Capacitance Graded Composite Construction
- EC-APG-02 Cycloaliphatic Epoxy Compound for Optimal Performance
- No oil, paper or porcelain
- Can be mounted vertically or horizontally
- Meets IEEE C57.19.01 Electrical and Mechanical Requirements
See Related Products HereSee Addtional Related Products Here
General
Application
Transformer
Catalog Number
350-004-T-1044-00
Color
Gray
Immersion Type - Above Flange
Air
Immersion Type - Below Flange
Oil
Material - Flange
Aluminum
Material - Insulation
APG-02 - Cycloaliphatic Epoxy
Mounting Position
Vertical to Horizontal
Number of Flange Mounting Holes
6
Series
SDCâ„¢ Series
Test Tap
Yes
Top Terminal Type
1 1/8-12
Type
SDC - Solid Dielectric Capacitor
Dimensions
Above Flange Length
43.6 in
Below Flange Length
40 in
Depth
12 in
Diameter - Above Flange Maximum
8.64 in
Diameter - Below Flange Maximum D <gt/> 1"
4.15 in
Diameter - Below Flange Maximum P
7 in
Diameter - Conductor Outside Under Insulation
1.5 in
Diameter - Live Part Bottom
1.25 in
Diameter - Live Part Top
3.5 in
Diameter - Rod / Tube
1.50/1.25 in
Dimensions
83.56 in x 12 in x 12 in
Effective Length - Top Terminal
2.5 in
Flange Mounting Hole Bolt Circle
10.88 in
Flange Mounting Hole Diameter
0.63 in
Flange Outside Diameter
12 in
Height
12 in
Length
83.56 in
Length - Drawlead Above Flange
40 in
Length - Ground Shield
26.8 in
Length - Insulated Section
76.06 in
Length - Insulation Above Flange
34.3 in
Length - Insulation Below Flange
11.4 in
Length - Live Part Bottom
1.8 in
Length - Live Part Top
5.7 in
Length - Minimum Oil Immersion Level
26.8 in
Sealing Surface Inside Diameter
7.63 in
Sealing Surface Outside Diameter
9.88 in
Stud Inside Diameter
1 in
Thickness
1.325 in
Thread Size - Drawlead Connector
3/4-12
Top Terminal Min. Thread Length
2.5 in
Weight
93 lb
Width
12 in
Electrical Ratings
BIL
350 kV
Current Rating
400 A
kV Class
69 kV
Minimum Creepage
82.5 in
Minimum Strike
36.6 in
Withstand Voltage - 60 Hz Dry
160 kV
Certifications And Compliance
Industry Standard(s)
IEEE C57.19.01
Operational
Immersion Type - Above Flange
Air
Immersion Type - Below Flange
Oil
Configuration
Mounting Position
Vertical to Horizontal
Number of Flange Mounting Holes
6