SDCâ„¢ Series, Composite Bushing - 8.7KV
Brand: Electro Composites
Catalog ID: 095-004-T-866-00
SDCâ„¢ 8.7kV-400DL A Transformer Condenser Bushing, Solid-Dielectric-Capacitor Type, Rated per IEEE C57.19.01, Drawlead Connected for Air-to-Oil Applications, 8.0" Min.Oil Immersion Level/CT Pocket, 13.6" Min. Creepage Length
Electro Composites SDC™ composite bushings are designed to provide the toughest, cleanest and safest bushing solution for all HV applications. We make standard OEM and aftermarket form-fit-function replacement bushings for substation transformers, GSU transformers, oil circuit breakers, switchgear, wall/floor (air-air and oil-oil), HVDC and other applications. Available from 1kV up to 170kV with current ratings up to 21,500A. SDC™ (Solid Dielectric Capacitor) bushings have a one-piece cycloaliphatic epoxycore and integral sheds. All SDC bushings are solid dielectric insulation – oil–free construction, capacitance graded condenser core with internal CT pocket/ground shield and a flange test tap, available in bottom connected or draw-lead configurations. Made in accordance with the most current bushing standards: IEEE C57.19.01, CSA C88.1, IEC 60137.
- SDCâ„¢ - Solid Dielectric Capacitance Graded Composite Construction
- EC-APG-02 Cycloaliphatic Epoxy Compound for Optimal Performance
- No oil, paper or porcelain
- Can be mounted vertically or horizontally
- Meets IEEE C57.19.01 Electrical and Mechanical Requirements
For Bushing Test Terminals, please see HereFor Bushing Drawlead Connectors and Adapters, please see Here
General
Application
Transformer
Catalog Number
095-004-T-866-00
Color
Gray
Flange Type
Dual BC
Immersion Type - Above Flange
Air
Immersion Type - Below Flange
Oil
Material - Flange
Aluminum
Material - Insulation
APG-02 - Cycloaliphatic Epoxy
Mounting Position
Vertical to Horizontal
Number of Flange Mounting Holes
4X / 3X
Series
SDCâ„¢ Series
Test Tap
Yes
Top Terminal Type
1 1/2-12
Type
SDC - Solid Dielectric Capacitor
Dimensions
Above Flange Length
13.37 in
Below Flange Length
10.63 in
Depth
8.5 in
Diameter - Above Flange Maximum
5.24 in
Diameter - Below Flange Maximum D <gt/> 1"
2.76 in
Diameter - Below Flange Maximum P
2.94 in
Diameter - Conductor Outside Under Insulation
1.25 in
Diameter - Live Part Bottom
1.25 in
Diameter - Live Part Top
3.5 in
Diameter - Rod / Tube
1.25/1.00 in
Dimensions
24 in x 8.5 in x 8.5 in
Effective Length - Bottom Terminal
0 in
Effective Length - Top Terminal
2.5 in
Flange Mounting Hole Bolt Circle
7.25 in
Flange Mounting Hole Diameter
0.63 in
Flange Outside Diameter
8.5 in
Height
8.5 in
Length
24 in
Length - Drawlead Above Flange
9.81 in
Length - Ground Shield
8 in
Length - Insulated Section
19.5 in
Length - Insulation Above Flange
5.6 in
Length - Insulation Below Flange
2.52 in
Length - Live Part Bottom
0.11 in
Length - Live Part Top
4.4 in
Length - Minimum Oil Immersion Level
8 in
Sealing Surface Inside Diameter
3.01 in
Sealing Surface Outside Diameter
6.62 in
Stud Inside Diameter
1 in
Thickness
0.755 in
Thread Size - Drawlead Connector
3/4-12
Top Terminal Min. Thread Length
2.5 in
Weight
16.6 lb
Width
8.5 in
Electrical Ratings
BIL
95 kV
Current Rating
400 A
kV Class
8.7 kV
Minimum Creepage
13.6 in
Minimum Strike
6.5 in
Withstand Voltage - 60 Hz Dry
35 kV
Certifications And Compliance
Industry Standard(s)
IEEE C57.19.01
Operational
Immersion Type - Above Flange
Air
Immersion Type - Below Flange
Oil
Configuration
Mounting Position
Vertical to Horizontal
Number of Flange Mounting Holes
4X / 3X