Transformer eyebolt connectors, blind hole wire port
Brand:
Connector Mfg. Co. (CMC)
Catalog ID:
NPB3-350I
Transformer eyebolt connectors, blind hole wire port
For moisture resistance, conductor ports are not drilled through the body.;Clear plated for low-contact resistance.;Fully tested to ANSI C119.4 for Class ‘A’ connectors.;For installation on equipment secondary adaptors.;Stud is electro-tin plated.;Supplied with aluminum radial-tipped set-screws.;Connector fabricated from 6061-T6 aluminum alloy for conductivity and strength.;Includes CO-OX oxide inhibitor in all conductor holes.;Each unit individually wrapped and labeled for ease of identification and cleanliness.;For installation, CMC® recommends the use of a 9” insulated Allen wrench.
- For moisture resistance, conductor ports are not drilled through the body
- Clear plated for low-contact resistance
- For installation on equipment secondary adaptors
- Stud is electro-tin plated
- Supplied with aluminum radial-tipped set-screws
- Connector fabricated from 6061-T6 aluminum alloy for conductivity and strength
- Includes CO-OX oxide inhibitor in allconductor holes
- Each unit individually wrapped and labeled for ease of identification and cleanliness
- For installation, CMC® recommends the use of a 9” insulated Allen wrench
Product details
General
Type
Adapters
Dimensions
Dimensions
3.99 in x 1.59 in x 1.375 in
Height
1.375 in
Length
3.99 in
Width
1.59 in
Conductor Related
Conductor Range
350 Kcmil-2 AWG