Stud Connector, Aluminum
Brand: ANDERSON
Catalog ID: ADSF121C389012
Aluminum alloy stud connector is used to connect aluminum flat to aluminum or copper equipment stud.
Aluminum alloy stud connector is used to connect aluminum flat to aluminum or copper equipment stud.
- Bolted Stud to Flat Connector
- Stud Diameter/Thread: 1-1/4"-12
- 3/8 inch thick NEMA C 4-Hole Flat Pad
- Contact surfaces are finished on both sides of the pad.
- Material: Casting - 356-T6 aluminum alloy, Stud Mounting Hardware - aluminum alloy
- Clamping bolts have hex-stops for one-wrench installation.
- Contact sealant is factory installed in connector stud threads and is recommended for conductor installation.
- To specify 90 degree connector, add suffix "90" to catalog number. Example: ADSF141D389012
General
Catalog Number
ADSF121C389012
Material
Aluminum
Material - Clamping Hardware
Aluminum Alloy
Material Type
Non-Standard
Number of Ground Braid Lug Holes
0
Number of Pad Holes
4
Number of Stud Threads
12
Type
Stud to Flat
Dimensions
Angle - Stud to Pad
90 °
Base Hole Spacing
0 in
Diameter - Base Holes
0 in
Diameter - Bolt
0 in
Diameter - Inside
0 in
Diameter - Stud
1.25 in
Length - Coupling
0 in
Length Before Compression
0 in
Weight
1.9 lb
Width - Pad
3 in
Electrical Ratings
Maximum Current Rating Amps Continuous
0
Configuration
Number of Ground Braid Lug Holes
0
Number of Pad Holes
4
Number of Stud Threads
12