Tee, Aluminum Weldment
Brand: ANDERSON
Catalog ID: WTTFR6080D90
Aluminum alloy weldment range taking tee for connecting aluminum tubing main to flat bar. Tongue holes have NEMA spacing. Contact surfaces on both sides of tongue. Contact sealant is recommended for pads after welding. To obtain 90 degree transverse type, add 90 to catalog number. Material: casting - 356-T6 aluminum alloy.
Aluminum alloy weldment range taking tee for connecting aluminum tubing main to flat bar. Tongue holes have NEMA spacing. Contact surfaces on both sides of tongue. Contact sealant is recommended for pads after welding. To obtain 90 degree transverse type, add 90 to catalog number. Material: casting - 356-T6 aluminum alloy.
- Material: Casting - 356-T6 aluminum alloy
- Range taking tee for connecting auminum tubing main to flat bar
- Contact surfaces on both sides of tongue
- Contact sealant is recommended for pads after welding
- To obtain 90 degree transverse type, add 90 to catalog number. Example: WTTFR06B290"
General
Catalog Number
WTTFR6080D90
Material
Aluminum
Material Type
Non-Standard
Number of Ground Braid Lug Holes
0
Number of Pad Holes
4
Type
Tee, Aluminum Weldment
Dimensions
Angle - Pad
90 °
Base Hole Spacing
0 in
Diameter - Base Holes
0 in
Diameter - Bolt
0 in
Diameter - Inside
0 in
Length - Coupling
0 in
Length Before Compression
0 in
Width - Flat Bar Tap
4 in
Width - Pad
4 in
Electrical Ratings
Maximum Current Rating Amps Continuous
0
Conductor Related
Conductor Diameter (Main) - Maximum
8.625 in
Conductor Diameter (Main) - Minimum
6.625 in
Conductor Diameter (Main) Range
6.625 - 8.625
Conductor Type
Aluminum Bus
Configuration
Number of Ground Braid Lug Holes
0
Number of Pad Holes
4