Anchor, Cross-Plate, 20in painted fits 5/8,3/4in rod
Marque: CHANCE Utility
No de catalogue: X20
Cross-Plate Anchor for 20" (508 mm) Hole used with 0.625" (15.9 mm) or 0.75" (19.1 mm) Diameter Rod.
The Chance Cross-Plate anchor is made for installation in holes drilled by power diggers or dug with backhoe. . Because the size of the hole does not affect holding capacity, the hole can be dug by the same auger that is used to dig the pole holes ontransmission projects. Cross-Plate anchors are installed in a diagonal bored hole which is undercut so the anchor is at right angles to the guy. A rod trench is either cut with a trenching tool or drilled with a small power auger. Both anchor and rod trenchshould be refilled and tamped.
- Cross-plate anchors are designed to be installed against side of hole. Rod trench is required to align rod with guy load.
- Painted with black paint
- Nut retainer on bottom of anchor holds nut in place during installation
- 1st alternate image: Bottom view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor
- 2nd alternate image: Top view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor
Général
Application
Earth Tension Anchoring
Catalog Number
X20
Enduit
Black Paint
Type
Earth Tension Anchors
Type de matériel
Standard
Type de produit
Cross Plate
UPC
096359066507
Dimensions
Aire
250 in²
Diamètre de la tige - commander séparément
- 0.625 in
- 0.75 in
Dimensions
17.250 po x 17.250 po x 2.750 po
Hauteur
2.75 in
Largeur
17.25 in
Longueur
17.25 in
Poids
15.611 lb
Taille de trou d'ancrage
20 in
Logistique
Emballage standard
4
Nombre d'unités sur la palette
56