Anchor, PISA Rod, 1in X 7ft Tripleye, 1in threads
Marque: CHANCE Utility
No de catalogue: E1020053
Pisa anchor rod 1" (25.4 mm) diameter, 7' (2134 mm) long with Tripleye.
Chance PISA rods are designed to be used with Tough One and PISA screw anchors. Both ends have a forged hex to allow the rod to be tightened to the anchor and the eyenut. The 5/8" diameter rods have 5/8" diameter threads; 3/4" and 1" diameter rods have 1" threads. Anchors and eyenuts have either 5/8" threads or 1" threads. Rods are galvanized in accordance with ASTM A153. Anchor rods are available without the eyenut or with various styles of eyenuts assembled to the rod at the factory.
- Hot forged hex collar provides strong connection to anchor and eye
- Hot dipped galvanized per ASTM A153
- Eyenut assembled to rod
- Rods used with PISA® Power Installed Screw Anchors
- Cannot be used with Expanding and Plate Anchors
Général
Application
Helical Anchoring
Catalog Number
E1020053
Enduit
Galvanized, ASTM A-153
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
36000 lb.
Type
Power Installed Screw Anchor (PISA)
Type d'écrou à 'illet
Tripleye
Type de matériel
Standard
Type de produit
Anchor Rod/Eyenut
UPC
096359076940
Dimensions
Diamètre de la tige
1 in
Dimensions
84.000 po x 2.875 po x 1.875 po
Hauteur
1.875 in
Largeur
2.875 in
Longueur
84 in
Poids
18.522 lb
Liée à la force
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
36000 lb.
Logistique
Emballage standard
1
Nombre d'unités sur la palette
50