Anchor, Rock 2.25in X 53in 1in Rod
Marque: CHANCE Utility
No de catalogue: R153L
Expanding Rock Anchor 1" (25.4 mm) Diameter Rod, 53" (1346 mm) long with Tripleye.
This Rock Anchor expands and wedges against solid walls of rock. Once it is expanded, the harder the pull on the rod—the tighter it wedges. Wedges are made of malleable or ductile iron with a rust-resistant coating. Rod should be in line with the guy. Installation is quick and simple. Bore the hole with hand or power drill, making sure that the diameter of the hole is 1⁄4-inch larger than the diameter of the unexpanded anchor. Drop the anchor in the hole. Put a bar through the large eye of the anchor rod. Turn the rod until the anchor is firmly expanded against the sides of the hole.
- Anchor expands and wedges against solid walls of rock
- The large drop-forged Tripleye® rod holds up to three guy strands
- Requires 2.5" diameter hole in competent rock a minimum depth of 12"
- Hot dipped galvanized per ASTM A153
Général
Application
Earth Tension Anchoring
Catalog Number
R153L
Enduit
Galvanized, ASTM A-153
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5° of alignment with the guy load may significantly lower strength. Recommended minimum installation depth is 12" in solid rock.
Résistance à la traction
36000 lb.
Type
Rock Anchors
Type d'écrou à 'illet
Tripleye
Type de matériel
Standard
Type de produit
Standard
UPC
096359051114
Dimensions
Diamètre
2.25 in
Diamètre de la tige
1 in
Dimensions
53.000 po x 2.500 po x 2.500 po
Hauteur
2.5 in
Largeur
2.5 in
Longueur
53 in
Poids
17.963 lb
Taille de trou d'ancrage
2.5 in
Liée à la force
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5° of alignment with the guy load may significantly lower strength. Recommended minimum installation depth is 12" in solid rock.
Résistance à la traction
36000 lb.
Logistique
Emballage standard
3
Nombre d'unités sur la palette
50