Rod, Anchor Extension, 3/4in X 2ft Tripleye
Marque: CHANCE Utility
No de catalogue: PSC1022176
Expanding/Cross-Plate Anchor Rod Extension 0.75" (19.1 mm) Diameter Rod, 2' (609 mm) long with Tripleye and 0.75" (19.1 mm) clevis bolt.
These anchor rod extensions primarily are for making above-grade connections between installed anchors and guy wires. Each extension rod has a clevis on one end and a forged eye on the other end. The eye is designed to distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading, kinking, or bending. The drop-forged eye of each extension rod is stronger than the rod itself. Each extension rod is hot dip galvanized and includes a high-strength clevis bolt and nut.
- The clevis bolt of the anchor rod extension attaches to the eye of anchor to move the guy deadend above ground level
- Each rod includes high-strength bolt and nut
- Hot dipped galvanized per ASTM A153
Général
Application
Earth Tension Anchoring
Catalog Number
PSC1022176
Enduit
Galvanized, ASTM A-153
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
23000 lb.
Type
Anchor Rod
Type d'écrou à 'illet
Tripleye
Type de matériel
Standard
Type de produit
Anchor Rod Extension
UPC
096359445555
Dimensions
Diamètre de la tige
0.75 in
Dimensions
24.000 po x 5.500 po x 2.000 po
Hauteur
2 in
Largeur
5.5 in
Longueur
24 in
Poids
6 lb
Liée à la force
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
23000 lb.
Logistique
Emballage standard
5
Nombre d'unités sur la palette
200
Quantité dans l'emballage
5