Rod, Expanding/Cross-Plate Anchor, 1in X 8ft Twineye
Marque: CHANCE Utility
No de catalogue: 5368
Expanding/Cross-Plate Anchor Rod 1" (25.4 mm) Diameter Rod, 8' (2438 mm) long with Twineye.
Anchor rod used with Expanding and Cross-plate anchors are available for one, two, or three guys. Thimbleye, Twineye and Tripleye eye design distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading, kinking, or bending. The drop-forged eye of each anchor rod is stronger than the rod itself. Rod length and diameter are stamped below each rod eye. Each rod is threaded 3-1/2" minimum length. Heavy square nut included.
- Thimbleye®, Twineye® and Tripleye® drop forged eye distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading,kinking, or bending.
- Hot dipped galvanized per ASTM A153
- Square nut assembled to rod
- Rods used with Cross-plate and Expanding anchors
Général
Application
Earth Tension Anchoring
Catalog Number
5368
Enduit
Galvanized, ASTM A-153
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
36000 lb.
Type
Anchor Rod
Type d'écrou à 'illet
Twineye
Type de matériel
Standard
Type de produit
Expanding, Cross Plate Anchor Rod
UPC
096359072539
Dimensions
Diamètre de la tige
1 in
Dimensions
96.000 po x 2.650 po x 1.750 po
Hauteur
1.75 in
Largeur
2.65 in
Longueur
96 in
Poids
21.168 lb
Certifications et conformité
Norme(s) de l'industrie
NEMA Standard
Liée à la force
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
36000 lb.
Logistique
Emballage standard
2
Nombre d'unités sur la palette
50