Rod, Expanding/Cross-Plate Anchor, 1in X 9ft Twineye
Marque: CHANCE Utility
No de catalogue: 5369
Expanding/Cross-Plate Anchor Rod 1" (25.4 mm) Diameter Rod, 9' (2743 mm) long with Twineye.
Anchor rod used with Expanding and Cross-plate anchors are available for one, two, or three guys. Thimbleye, Twineye and Tripleye eye design distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading, kinking, or bending. The drop-forged eye of each anchor rod is stronger than the rod itself. Rod length and diameter are stamped below each rod eye. Each rod is threaded 3-1/2" minimum length. Heavy square nut included.
- Thimbleye®, Twineye® and Tripleye® drop forged eye distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading,kinking, or bending.
- Hot dipped galvanized per ASTM A153
- Square nut assembled to rod
- Rods used with Cross-plate and Expanding anchors
Général
Application
Earth Tension Anchoring
Catalog Number
5369
Enduit
Galvanized, ASTM A-153
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
36000 lb.
Type
Anchor Rod
Type d'écrou à 'illet
Twineye
Type de matériel
Non-Standard
Type de produit
Expanding, Cross Plate Anchor Rod
UPC
096359072546
Dimensions
Diamètre de la tige
1 in
Dimensions
108.000 po x 2.650 po x 1.750 po
Hauteur
1.75 in
Largeur
2.65 in
Longueur
108 in
Poids
24.01 lb
Certifications et conformité
Référence d'enregistrement RUS
x – Rod, anchor
Liée à la force
Notes concernant la force
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Résistance à la traction
36000 lb.
Logistique
Emballage standard
2
Nombre d'unités sur la palette
50