text.skipToContent text.skipToNavigation


by Hawke 

The American series 710 dual certified Exe/Exd cable gland is suitable for use with the following cable types: TC-ER-HL, TC-ER, PLTC, PLTC-ER, ITC, ITC-HL & ITC-ER (see technical data for more information) The gland provides a barrier seal to the individual cores within the cable and prevents entry of the products of an explosion into the cable. The gland features the worlds only NEC certified transparent elastomeric fully inspectable compound chamber

  • Inspectable Deluge Seal - Offering IP66, IP67, IP68 & IP69 Ingress Protection
  • Transparent Elastomeric Fully Inspectable Compound Pot – compatible with both injectable resin and 2 part compound
  • Patented Cable Gland Tightening Guide - Helps prevent damage caused by over tightening
  • Unique Rear Seal - Offering ultimate sealing over an extremely wide cable acceptance range.
See technical section of the datasheet for installation rules and regulations. Visit www.universalreloaded.com to download a full version of the catalogue

Product Details


  • Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. For use with cable type TC-ER-HL Class I, Groups A, B, C and D (up to 1"). TC-ER, PLTC, PLTC-ER, ITC, ITC-HL or ITC-ERClass I, Division 2, Groups A, B, C and D
  • Class II, Division 2, Groups F and G
  • and Class III Hazardous Locations For use with cable type
Ingress Protection IP66, IP67 and IP68* (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X
Material Brass, NP Brass or Stainless Steel
Operating Temperature Range Celcius -50°C to +80°C (UL) and -60°C to +80°C (ATEX/IECEx)
Series American Series Cable Glands

Certifications and Compliance

  • ABS Marine Approval - Available on Request
  • DNV GL Approval - Available on Request
  • DTS01
Certified Listed
  • ATEX
  • ABS
  • IECEx
  • DNV
  • UL
Hazardous Rating(s)
  • Flameproof Exdb IIC Gb, Increased Safety Exeb IIC Gb and Dust Extb IIIC Db Ex II 2 GD
  • DTS01
IP Rating
  • IP66
  • IP67
  • IP68
  • NEMA 4X
Non Hazardous Location UL 2225, CSA C22.2 No. 174-18, UL 514B and CSA C22.2 NO. 18.3-12. IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31