00:10Hi, Kristen Kinder here again with another Hubble.

00:13How to today, I'm going to introduce you to re new flush fit device leveling plate.

00:18The flush fit is designed to easily repair those electrical outlets that are recessed into

00:23the wall too far. Here's an example of a recess device and here's

00:28an example of what it looks like after the flush fit device,

00:31leveling plate is installed to use the flush fit leveling plate.

00:37First turn off the power to the device, then remove the wall plate

00:45next loosen the device screws enough. So the device is separated from the wall

00:50surface position, the

00:57flush fit leveling plate over the top device screw between the wall surface and the back of

01:01the device yoke, then pivot the plate. So the bottom of the plate contacts the bottom

01:06device screw. Now tighten both device screws sandwiching the

01:10leveling plate between the device and the wall surface, taking care to align the device.

01:18Now simply replace the wall plate and just like that you've improved the look and functionality

01:24of your device.

01:31For more information on these and other fine rao products,

01:34please visit our website. I'm Kristen Kinder and that was a Hubble hug

01:37too.