00:00I devices, wall outlet has been designed to make it simple and quick to get set up in a few

00:07short steps. You'll transform your wall outlet into a

00:10connected wall outlet in the box. You will find the I devices wall outlet

00:15installation guide as well as a few wire nuts. To help with your installation to install,

00:20you will need a flathead screwdriver, a Phillips screwdriver,

00:24a voltage detector and pliers.

00:26The I devices wall outlet fits any standard size rock or face plate so you can select one

00:32that works best for your home.

00:34If the wires in your gang box differ from the installation described in this video or you are

00:39unclear at any point of the installation process, please consult a qualified licensed

00:44electrician I devices while outlet must be installed in a manner that conforms to all

00:49applicable national state and local building codes turn off the power to the circuit at your

00:55breaker or fuse panel.

00:57If you are replacing an existing outlet, verify that the outlet no longer has power before

01:02proceeding, using a voltage detector.

01:06Now unscrew and remove the face plate from the existing outlet.

01:16Next, remove the two screws that secure the outlet to the gang box.

01:32Carefully pull on the outlet to remove it from the gang box.

01:38Take a photo of your existing wiring for future reference,

01:45disconnect your old wall outlet by unscrewing and removing the existing wires

01:57wherever possible. Install the I devices wall outlet in a non

02:01metallic gang box and use a non metallic face plate as metal gang boxes and face plates can

02:06decrease the wi fi signal strength.

02:16When installing the I devices, wall outlet, connect the black wire on the back of the wall

02:20outlet to the line wires which are typically black with the provided wire nuts.

02:25If there are multiple black wires cap them all together.

02:29Next, connect the white wire on the I devices, wall outlet to the neutral wires which are

02:34usually white with the provided wire nuts. If there are multiple white wires cap them all

02:39together, lastly connect the bare copper ground wire on the I devices,

02:45wall outlet to the ground wire which is usually copper or green in color.

02:49Ensure all wire nets are securely fastened carefully, push the wires into the gang box and

02:55install the wall outlet into the gang box. Taking care not to pinch any wires,

03:03secure the I devices, wall outlet into the gang box with the provided screws.

03:12It's best to start both screws before tightening to keep installation easy and ensure

03:17the outlet is straight.

03:28You can now install your selected face plate, the I devices,

03:31wall outlet fits any standard size rocker face plate, so you can select one that works best

03:37for your home. Turn the power back on at

03:44the breaker. If the outlet is connected properly,

03:47you should see the led indicator rapidly flash blue to indicate the unit is ready to connect

03:52to the app, launch the I devices connected app and you will be guided through the process of

03:57connecting your I devices product for IOS devices.

04:01You will need the home kit, set up code on the pull out tab on your product.

04:11Congratulations. Your wall outlet is installed.

04:14You're now ready to connect to your wireless network.

04:19If you want to learn more about I devices outlet or need additional help.

04:23Head over to I devices. Inc.com/support.