Prise duplex MAX HBL® extra robuste à lame droite 15A, HBL5262R
Marque: Hubbell Wiring Device-Kellems
No de catalogue: HBL5262R
HBL® lame droite, prise double MAX à usage intensif 15A, 2-pôles, 3-fils, 125V, 5-15R, câblage arrière et latéral, rouge.
HBL® Extra Heavy Duty Max Industrial Series - Hubbell’s commitment to quality continually reinforces a philosophy of unrivaled performance. No Hubbell device exemplifies this philosophy more than the HBL5262. While all Hubbell receptacles are designed and manufactured to withstand even the harshest environments, none match the total performance of the HBL5262. Whether in a factory, office building or school, the Hubbell HBL5262 is the receptacle of choice when people are depending on the safety and reliability of a receptacle. The safest, most reliable design for a low resistance flow of fault currents. Oversized “bell" shaped ground contacts, along with nickel plated steel retaining shields, help minimize damage to the grounding system during abrupt pullout.
- La borne de terre câblée à l'arrière permet une installation plus rapide et plus facile
- Bande de terre intégrale en laiton d'une seule pièce
- Face à rainure de repérage
- Conception de corps profond avec face d'identification du circuit
Auto-terre
Détails du produit
Général
Application
- Grade de spécification à usage intensif
Catalog Number
HBL5262R
Conditions environnementales
Indoor Dry Unless Protected By Additional Means
Couleur
Red
Indicateur EU RoHs
Yes
Matériel - quincaillerie de montage
Screw Mounting
Nom de marque de fabricant d'origine
Hubbell Wiring Device-Kellems
Nombre de pôles
2-Pole
Performance
- Electrical - Current Interrupting - Certified for current interrupting at full rated current
- Electrical - Dielectric Voltage - Withstands 2,000V minimum
- Environmental - Flammability - Top: UL 94V-2, Base: UL 94V-0
- Environmental - Operating Temperatures - Maximum continuous 75°C, minimum -40°C (w/o impact)
- Mechanical - Product Identification - Ratings are a permanent part of the device
- Mechanical - Terminal Accommodation - #14-#10 AWG copper stranded or solid conductor only
- Mechanical - Terminal Identification - Terminals identified in accordance with UL 498 and CSA
Puissance max. (hp)
0.5
Série
Extra Heavy Duty
Spécifications
- Automatic Self-grounding Clip - Stainless steel
- Base - PBT
- By-Pass Power Contacts - .036". (.9) Brass
- Clamping Plate - Nickel plated brass
- Face - Nylon
- Ground Contacts - .031 in. (.8) Brass
- Mounting Screws - Zinc plated steel
- Mounting Strap - .050 in. (1.3) Brass
- Terminal Screws - Plated brass
Température fonctionnement
Maximum continuous 75°C and minimum -40°C without Impact
Type
Finder Groove Face
Type
Standard Duplex
Type d'article
Traditional Duplex
UPC
783585435183
Dimensions
Dimensions
3.28 po x 1.65 po x 1.19 po
Hauteur
1.19 in
Largeur
1.65 in
Longueur
3.28 in
Poids
0.25 lb
Taille de l'afficheur
Standard Sized Product
Caractéristiques électriques
Connectivité
Back and Side Wired
Courant nominal
15 A
Courant nominal
15 A
Courant nominal
15 A
Description de la tension nominale
125 V
Phase
Single Phase
Puissance en Watts
1875 W
Résistance diélectrique
Withstands 2,000V minimum
Tension nominale
125 VAC
Lié au conducteur
Calibre des fils
#14 AWG to #10 AWG
Nombre de fils
3-Wire
Certifications et conformité
Achetez des produits qualifiés aux États-Unis
TAA Compliant (All status valid till December 2024)
Classe NEMA nominale
5-15R
Norme(s) de l'industrie
- Certified to CSA 22.2, No. 42 File 285
- Fed. Spec. W-C-596
- NEMA® WD-6 Compliant
- UL Listed to UL498 File No. E2186
Normes - Conformité RoHS
CM