Anchor, Lead, SS5 8/10/12 X 7ft
Marca: Chance
ID del Catálogo: 012642AEJ7
Square Shaft (SS 5) Lead Section, 7' (2134 mm) long with 8" (203 mm) - 10" (254 mm) -12" (304 mm) Helices.
Square Shaft anchors are used in areas where weak soil conditions exist and/or higher holding capacities are required. Extension shafts are added to allow the Lead Section to be installed to the proper depth. The Chance Square Shaft "SS" Anchor Lead Sections are available in various helical plate combinations and square shaft sizes. The Square Shaft screw anchor system consists of three galvanized components: Lead Section, Extension Shaft (sold separately), and the Guy Adapter (sold separately).
- Square Shaft Lead Sections are assembled to Square Shaft Extension with through bolt.
- The helical shaped plates do not auger into the soil but rather screw into it with minimal soil disturbance
- Hot dipped galvanized per ASTM A153
- Capacity of anchor can be determined by measuring installation torque
Detalles del producto
General
Application
Helical Anchoring
Catalog Number
012642AEJ7
Coating
Galvanized, ASTM A-153
EU RoHS Indicator
No
Material Type
Standard
Number of Helices
3
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
70000 lb.
Torque Rating
5500 ft-lbs
Type
Lead Sections
UPC
096359242307
Dimensiones
Anchor Helix Diameter(s)
8 in - 10 in - 12 in
Dimensions
84.000 in x 12.000 in x 12.000 in
Height
12 in
Length
84 in
Weight
79.772 lb
Width
12 in
Certificaciones y Cumplimiento
Buy America(n) Qualified
Contact Manufacturer
Logística
Pallet Quantity
20
Standard Package
1