Occupancy Sensors, Adaptive TechnologyDual (Ultrasonic and PIR) Wall Mount Sensor, 1600 Square FeetCoverageSQ' With Relay

By Hubbell Wiring Device-Kellems

Catalog ID: ATD1600WRP

Occupancy Sensors, Adaptive TechnologyDual (Ultrasonic and PIR) Wall Mount Sensor, 1600 Square FeetCoverageSQ' With Relay

By Hubbell Wiring Device-Kellems

Catalog ID: ATD1600WRP

Switches and Lighting Controls, Occupancy Sensors, Adaptive TechnologyDual (Ultrasonic and PIR) Wall Mount Sensor, 1600 Square FeetCoverageSQ' With Relay

Adaptive Dual Technology combines Ultrasonic and Passive Infrared technology, minimizing the risk of lights turning ON when the space is unoccupied. Once occupancy is detected by both technologies within the space lights are turned ON, only one technology is necessary to keep the lights ON. Adaptive technology provides better control. Hubbell’s patented breakthrough in advanced control feature smart microprocessors constantly monitoring the controlled area and adjust the sensitivity and timer based on environmental history. The optimum choice when performance is paramount.

Dual (ultrasonic and passive infrared), low voltage sensor with photo cell and isolated relay
Coverage 1600 sq. ft.
Adaptive technology - "Install and forget" operation
110° coverage provides complete room sensing when corner mounted
Swivel mounting bracket included for wall or ceiling mounting

With Photocell and Relay

Add to List

More Options

Where to Buy

See locations

General

Color	White
Environmental Conditions	Indoor Dry Unless Protected By Additional Means
Humidity	0% to 95% non-condensing relative humidity
Indicator(s) Type	PIR= Red LED, Ultrasonic= Green LED
Item Type	Ceiling and Wall Mount Sensors
Load Capacity	Load Is A Function Of The Control Unit
Material	ABS (Acrylonitrile butance styrene - Thermoplastic polymer)
Material - Mounting Hardware	Screw Mounting
Mounting Type	Wall Mount
OEM Brand Name	Hubbell Wiring Device-Kellems
Operating Cycles	6,000 Cycles Minimum
Operating Temperature	32 Deg F to 104 Deg F (0 Deg C to 40 Deg C)
Performance	Controls - Ambient Light - 1 to 1000 foot candles Controls - Sensitivity - Adaptive 0 to 100% Controls - Time Delay - Test (8 seconds), adaptive 8 to 40 minutes Electrical - Isolated Relay - Normally open and normally closed, terminals available Electrical - Power Requirements - 24V DC nominal, 33mA from Hubbell CU series control unit Environmental - Operating Temperature - 32°F to 104°F (0°C to 40°C) with rate of change not exceeding 20°F (11°C) per hour Environmental - Storage Temperature - -20°F to 150°F (-29°C to 65°C), 0% to 95% non-condensing relative humidity Sensing Indicators - Passive Infrared - Red LED Sensing Indicators - Ultrasonic - Green LED
Photocell	Yes
Series	Dual
Storage Temperature Range	-20°F to 150°F (-29°C to 65°C)
Style	Wall Mount
Type	Sensors
UPC	783585349213