text.skipToContent text.skipToNavigation
My Lists
0
 
  2. Products
  3. Data & Communications
  4. Anchoring
  5. Cross Plate
  6. Anchor, Cross-Plate, 20in painted fits 5/8,3/4in rod

Anchor, Cross-Plate, 20in painted fits 5/8,3/4in rod

By CHANCE Utility 

Catalog ID: X20

By CHANCE Utility
Catalog ID:  X20
Cross-Plate Anchor for 20" (508 mm) Hole used with 0.625" (15.9 mm) or 0.75" (19.1 mm) Diameter Rod.

The Chance Cross-Plate anchor is made for installation in holes drilled by power diggers or dug with backhoe. . Because the size of the hole does not affect holding capacity, the hole can be dug by the same auger that is used to dig the pole holes ontransmission projects. Cross-Plate anchors are installed in a diagonal bored hole which is undercut so the anchor is at right angles to the guy. A rod trench is either cut with a trenching tool or drilled with a small power auger. Both anchor and rod trenchshould be refilled and tamped.

  • Cross-plate anchors are designed to be installed against side of hole. Rod trench is required to align rod with guy load.
  • Painted with black paint
  • Nut retainer on bottom of anchor holds nut in place during installation
  • 1st alternate image: Bottom view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor
  • 2nd alternate image: Top view of Anchor with Anchor Rod installed. Anchor Rod not included with Anchor
Contact Us
Add to List

More Options

Get a Quote

Product Details

General

Application Earth Tension Anchoring
Coating Black Paint
Type Earth Tension Anchors
UPC 096359066507

Dimensions

Anchor Hole Size 20 in
Area 250 in²
Rod Diameter - Order Separately
  • 0.625 in
  • 0.750 in
Weight 15.611 lb

Logistics

Pallet Quantity 56
Standard Package 4

Resources and Downloads