Anchor, PISA Nut, 5/8in threads, Tripleye
Catalog ID: 12593
Chance PISA eyenuts are designed to be used Chance PISA screw anchors. The eyenuts with 5/8" diameter threads are used with 5/8" diameter rods. The eyenuts with 1" threads are used with; 3/4" and 1" diameter rods. Rods are galvanized in accordance with ASTM A153. Eyenuts are availale in three configurations to be used with one, two or three guy wires.
- For use with Pisa style anchor rods
- Eyes are dropped forged for better strength and reliability
- Hot dipped galvanized per ASTM A153
- Not for use on 5/8" Machine Bolts
|Coating||Galvanized, ASTM A-153|
|Strength Note||Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.|
|Tensile Strength||16000 lb|
|Type||Power Installed Screw Anchor (PISA)|
|Rod Diameter||0.625 in|
Resources and Downloads
Installation/Instruction Manual (IOM)
Please wait, preparing to download your file.