Reinforcing Plates

PLATE, CROSSARM, REINFORCING

By CHANCE Utility

Catalog ID: 4047

Reinforcing plate prevents damage to 6" x 8" wood crossarm from tightened nuts. The design has a pressed rib and is normally used on the side of the crossarm.

View Details

Resource Quick View

* Representative image

PLATE, CROSSARM, REINFORCING

By CHANCE Utility

Catalog ID: 4063

Reinforcing plate prevents damage to the crossarm from tightened nuts. Plate is used on top or bottom of flat top crossarms to reduce the strain from forged steel insulator pins.

View Details

Resource Quick View

* Representative image

PLATE, CROSSARM, REINFORCING

By CHANCE Utility

Catalog ID: 4045

Reinforcing plate prevents damage to 4" x 5" wood crossarm from tightened nuts. The design has a pressed rib and is normally used on the side of the crossarm.

View Details

Resource Quick View

* Representative image

PLATE, DOUBLE ARMING

By CHANCE Utility

Catalog ID: 5844

Double arming plate 4" wide x 24" long. Used for double arm construction in cases where no extension beyond the arm is required. Attaches to the crossarm through the slots provided.

View Details

Resource Quick View

* Representative image

PLATE, DOUBLE ARMING

By CHANCE Utility

Catalog ID: 5819

Double arming plate 4" wide x 17" long. Used for double arm construction in cases where an extension beyond the arm is required. Attaches to the crossarm through the slots provided.

View Details

Resource Quick View

* Representative image

PLATE, DOUBLE ARMING

By CHANCE Utility

Catalog ID: C2060582

Plate, Double Arming

View Details

Resource Quick View

* Representative image

PLATE, DOUBLE ARMING, 23 1/2in x 4in

By CHANCE Utility

Catalog ID: PSC2061025

Plate, Double Arming, 23 1/2In X 4In

View Details

Resource Quick View

* Representative image

PLATE, DOUBLE ARMING, 30 in

By CHANCE Utility

Catalog ID: PSC2070160

Plate, Double Arming, 30 In

View Details

Resource Quick View

PLATE, LIFT AND LOAD

By CHANCE Utility

Catalog ID: 7898

Lift and Load Plate 2 1/2" x 7" x 1/4" thick three hole style. Used to protect poles on heavy down guying when Thimbleye®, Angle-Thimbleye® or Oval-Eye bolts are used through the pole.

View Details

Resource Quick View

PLATE, LIFT AND LOAD

By CHANCE Utility

Catalog ID: 7888

Lift and Load Plate 2 1/2" x 7" x 1/4" thick two hole style. Used to protect poles on heavy down guying when Thimbleye®, Angle-Thimbleye® or Oval-Eye bolts are used through the pole.

View Details

Resource Quick View

* Representative image

PLATE, LIFT AND LOAD

By CHANCE Utility

Catalog ID: PSC2060946

Plate, Lift And Load

View Details

Resource Quick View

PLATE, LIFT AND LOAD

By CHANCE Utility

Catalog ID: 7897

Lift and Load Plate 2 1/2" x 7" x 3/16" thick three hole style. Used to protect poles on heavy down guying when Thimbleye®, Angle-Thimbleye® or Oval-Eye bolts are used through the pole.

View Details

Resource Quick View

PLATE, LIFT AND LOAD

By CHANCE Utility

Catalog ID: PS7887

Lift and Load Plate 2 1/2" x 7" x 3/16" thick two hole style. Used to protect poles on heavy down guying when Thimbleye®, Angle-Thimbleye® or Oval-Eye bolts are used through the pole.

View Details

Resource Quick View

PLATE, STRAIN

By CHANCE Utility

Catalog ID: 6575

Strain Plate 4" wide x 8" long is used in wrapped guy applications to prevent pole from being damaged by guy wire. Four nail holes at each corner are 3 /16" diameter.

View Details

Resource Quick View