Quadrant Strain Clamp - Copper Substation Cable Bus
Brand: ANDERSON
Catalog ID: BR1200N
"Aluminum Bolted Quadrant Strain Clamps are designed to be used primarily for deadending copper substation cable bus. These clamps are compact for greatest phase clearance. During installation the cable will slide free under the U-Bolts, or if preferred, U-Bolts may be removed and cable laid in clamp grooves from the side. Material: Clamp-Aluminum Alloy, Socket-Galvanized Ductile iron, Clamping Range: 0.811"-1.152""
- "Type BR1 is designed for single cable
- The Sag Eye Ultimate Strength is 60% of the Ultimate Body Strength without fitting
- Rated slip strength as a % of conductor RBS varies with conductor type, size, and stranding. Minimum slip strength rating on standard strength conductors is 40% RBS (Partial Tension). For many standard strength conductors, minimum slip strength of this clamp series is 60% RBS (Normal Tension). Consult factory for slip strength test data on specific clamp and conductor combinations
- Bolt and Nut may be substituted for clevis pin by adding suffix "BNK" to catalog number. Example: BR1200NBNK
- Bolt and clevis pin will be the same diameter"
General
Bolt Installation Torque (Recommended)
720 in-lbs
Fitting Type
None
Material - Body
Bronze Alloy
Material - Hardware
Galvanized Steel
Material - Keeper
High Strength Bronze
Material - Pin (Cotter)
Stainless Steel
Product Category
Quadrant
Strength Rating - Ultimate Body
15000 lb
Style
BR1
Type
Bolted
U-Bolts
3 in
Dimensions
Clamping - Maximum
1.63 in
Clamping - Minimum
1.411 in
Clevis Opening
0.9375 in
Diameter - Clevis Pin
0.625 in
Height
5 in
Length
12.75 in
Weight
15 lb
Electrical Ratings
Voltage Application
Standard
Conductor Related
Clamping Range
1.411- 1.630
Certifications And Compliance
Industry Standard(s)
ANSI C119.4