Steel Arm Yoke

Designed for use on the arm of a steel pole, the Steel Arm Yoke mounts over a .75-inch-thick end plate as shown at left. Swivel castings in the end of the yoke assure proper alignment of the Strain Poles to the conductor-end yoke. The load rating is dependent upon the angle of the end plate on the arm- 45°- is maximum angle allowed with a maximum load of 9,000 pounds. In-line loading of the yoke permits a maximum load of 15,000 pounds. Bronze pins place the strain poles 21 inches apart, center-to-center. A lifting eye is cast into the top of the yoke for the purpose of landing theyoke upon the end plate of the pole arm.