Stud Connector, Aluminum
Brand: ANDERSON
Catalog ID: ADSF121C389012
Aluminum alloy stud connector is used to connect aluminum flat to aluminum or copper equipment stud.
- Bolted Stud to Flat Connector
- Stud Diameter/Thread: 1-1/4"-12
- 3/8 inch thick NEMA C 4-Hole Flat Pad
- Contact surfaces are finished on both sides of the pad.
- Material: Casting - 356-T6 aluminum alloy, Stud Mounting Hardware - aluminum alloy
- Clamping bolts have hex-stops for one-wrench installation.
- Contact sealant is factory installed in connector stud threads and is recommended for conductor installation.
- To specify 90 degree connector, add suffix "90" to catalog number. Example: ADSF141D389012
General
Catalog Number
ADSF121C389012
Material
Aluminum
Material - Clamping Hardware
Aluminum Alloy
Material Type
Non-Standard
Number of Ground Braid Lug Holes
0
Number of Pad Holes
4
Number of Stud Threads
12
Type
Stud to Flat
Dimensions
Angle - Stud to Pad
90 °
Base Hole Spacing
0 in
Diameter - Base Holes
0 in
Diameter - Bolt
0 in
Diameter - Inside
0 in
Diameter - Stud
1.25 in
Length - Coupling
0 in
Length Before Compression
0 in
Weight
1.9 lb
Width - Pad
3 in
Electrical Ratings
Maximum Current Rating Amps Continuous
0
Configuration
Number of Ground Braid Lug Holes
0
Number of Pad Holes
4
Number of Stud Threads
12