Anchor, Disk Rod, 3/4in X 6ft Twineye
Catalog ID: C2000053AW
Forged eye Disk Anchor rods are galvanized, dipped in protective paint and include plastic sleeve, flanged cap nut and fiber washer . The anchor rod's flanged cast cap nut is large and heavy for greater protection. The heat-shrink sleeve over the galvanized anchor rod helps prevent moisture from going down the rod. The insulating washer is plastic-reinforced thermoset material for better load-bearing properties.
- Thimbleye®, Twineye® and Tripleye® drop forged eye distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading,kinking, or bending.
- Hot dipped galvanized per ASTM A153, Black asphalt paint applied over galvanizing, plastic tube assembled on rod
- Includes Fiber Washer and Cap nut
- Rods used with round Disk Anchors
|Application||Earth Tension Anchoring|
|Coating||Galvanized, ASTM A-153, Black Paint, Plastic Tube|
|Strength Note||Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.|
|Tensile Strength||23000 lb|
|Type||Corrosion-Resistant Anchor Parts|
|Rod Diameter||0.750 in|
Resources and Downloads
Installation/Instruction Manual (IOM)
Please wait, preparing to download your file.