Anchor, Lead, SS175, 8/10 X 3ft Rock-It
Brand:
Chance
Catalog ID:
C1101296
Square Shaft (SS 175) Lead Section 3' (914 mm) long with 8" (203 mm) - 10" (254 mm) Helices.
The ROCK-IT™ lead section by Hubbell Power Systems is an innovative solution to help penetrate thin rocky layers without pre-drilling. The single carbide tip design was developed after site testing of several rock anchor configurations to provide an economical, yet proven solution to reach load-bearing depths.
- Square Shaft Lead Sections are assembled to Square Shaft Extension with through bolt.
- The helical shaped plates do not auger into the soil but rather screw into it with minimal soil disturbance
- Hot dipped galvanized per ASTM A153
- Capacity of anchor can be determined by measuring installation torque
Product details
General
Application
Helical Anchoring
Catalog Number
C1101296
Coating
Galvanized, ASTM A-153
Number of Helices
2
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
100000 lb.
Torque Rating
10500 ft-lbs
Type
Lead Sections
UPC
096359731351
Dimensions
Anchor Helix Diameter(s)
8 in - 10 in
Length
36 in
Logistics
Standard Package
1
Resources and downloads
Specifications
Catalogs
Installation Manuals
Sales Drawings
Videos
CHANCE Square Shaft Anchor Tools Selection Process
CHANCE Square Shaft Anchor Installation