text.skipToContent text.skipToNavigation
My Lists
0
 
  2. Products
  3. Power & Utilities
  4. Tools, Dies & Accessories
  5. Jumpers, Load Pick-Up & Load Break
  6. Temporary Cutout Tool
  7. Temporary Cutout Load Break Tool, 8.3/15kV

Temporary Cutout Load Break Tool, 8.3/15kV

By CHANCE Utility 

Catalog ID: PSC6010347

By CHANCE Utility
Catalog ID:  PSC6010347
CUTOUT,TEMPORARY 15kV POLY LOADBREAK, This tool provides a temporary means of connecting and disconnecting equipment or circuits under load conditions. This tool design does not have a fuse and does not provide protection for fault or overcurrent conditions. Hot parts are identical to Chance Type C cutouts, including the tubular-copper disconnect blade. The tool simply clamps onto primary conductor with a Grip-All clampstick. Brass stud at lower end accepts clamp on temporary tap jumper. An arc-chute-type interrupter gives the tool its excellent loadbreak capability. To interrupt load currents, the device makes use of a stainless-steel auxiliary blade within a Delrin® arc chute. This self-contained loadbreak device operates by a simple disconnect stick. No special or portable tools are required to operate the unit. To break the current, just insert a disconnect stick into the operating ring and rapidly open the device. In the process of opening, the spring-loaded auxiliary blade snaps out through the arc chute to elongate, cool and extinguish the confined arc. This loadbreaking operation is independent of the disconnect stick speed. To provide a clearly visible break, the disconnect blade hangs in approximately a vertical position.
  • Available in two sizes
  • Provides a temporary means of connecting and disconnecting equipment or circuits under load conditions
  • Design does not have a fuse and does not provide protection for fault or overcurrent conditions
  • Insulated bushing and hot parts are from Chance Type C-Polymer cutouts, including tubular-copper disconnect blade
  • Arc-chute-type interrupter gives tool excellent loadbreak capability
  • To interrupt load currents, device employs a stainles ssteel auxiliary blade within Delrin® arc chute
  • Tool simply clamps onto primary conductor with a Grip-All clampstick. Bronze stud at lower end accepts clamp on temporary tap jumper
  • 250 in.-lb. torque for clamp eyescrew
  • Includes tap stud with 1/2" diameter

NA/

Contact Us

More Options

Get a Quote

Product Details

General

EU RoHS Indicator No
Style Load Disconnect
UPC 096359395638

Dimensions

Weight 30.38 lb

Electrical Ratings

Amperage Rating 300
Voltage - Maximum 15 kV
Voltage Rating 15000 V

Conductor Related

Conductor Diameter (Main) - Maximum 1.16 in

Resources and Downloads

Catalogs

Jumpers & Load Pickup Tools (2300)

Installation/Instruction Manual (IOM)

Temporary Cutout - Load Break