Rod, Anchor Extension, 1in X 2ft Twineye
Brand:
Chance
Catalog ID:
PSC1022183
Expanding/Cross-Plate Anchor Rod Extension 1" (25.4 mm) Diameter Rod, 2' (609 mm) long with Twineye and with 7/8" (22.2 mm) clevis bolt.
These anchor rod extensions primarily are for making above-grade connections between installed anchors and guy wires. Each extension rod has a clevis on one end and a forged eye on the other end. The eye is designed to distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading, kinking, or bending. The drop-forged eye of each extension rod is stronger than the rod itself. Each extension rod is hot dip galvanized and includes a high-strength clevis bolt and nut.
- The clevis bolt of the anchor rod extension attaches to the eye of anchor to move the guy deadend above ground level
- Each rod includes high-strength bolt and nut
- Hot dipped galvanized per ASTM A153
Product details
General
Application
Earth Tension Anchoring
Catalog Number
PSC1022183
Coating
Galvanized, ASTM A-153
EU RoHS Indicator
No
Eyenut Style
Twineye
Strength Note
Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5 ° of alignment with the guy load may significantly lower strength.
Tensile Strength
36000 lb.
Type
Anchor Rod
UPC
096359451440
Dimensions
Length
24 in
Rod Diameter
1 in
Weight
9.1 lb
Certifications And Compliance
Buy American Compliant
Contact Manufacturer
Logistics
Standard Package
5